The Future of Roads: Intelligent Road Studs

Intelligent Road Studs - MAT Foundry

Despite the efforts made to improve road safety, traffic collisions still regularly occur. The latest development in road infrastructure aims to reduce the numbers of accidents even further by evolving the tried and tested ‘cat’s eye’ into something more.

Continued Improvement

Invented in the UK in 1934, the cat’s eye has been quietly doing its job for over 80 years - the simplicity and effectiveness of its design standing the test of time and seeing it adopted around the world.

The ‘Intelligent LED Road Stud’ is the evolution of the cat’s eye taking it from the simple reflective lane indicator to a powered light visible from a kilometre away, which can also be connected to other traffic systems and turned on and off to help direct traffic flow.

One of the primary uses it is being tested for is on roundabouts, where fixed cats eyes are not usually possible because of the multidirectional and fluid nature of the traffic flow around them. These new road studs will be synchronised with the traffic lights, turning on as the lights turn green and directing drivers to their correct lane eliminating confusion.

Roundabouts are proven to reduce the numbers of fatal collisions compared with cross junctions, but a side effect is that they can sometimes increase the total numbers accidents depending on the complexity of the layout.  Drivers can sometimes struggle to interpret road markings (if the road markings haven’t been worn away) and signs quickly enough and can lose lane discipline - it is hoped the new studs will solve this problem.

Intelligent Road Studs - MAT Foundry

Problem Areas

Work is underway on a road layout near Liverpool notorious for its high rate of traffic collisions – and significant because it marks the first occasion this new piece of technology is to be used on an operational junction in England.  Up till now the technology has only been used in tunnels and on one roundabout in Edinburgh, Scotland.

Switch Island junction in Merseyside controls the merging together of two motorways and several A-roads, incorporating a roundabout, and producing an average of one accident every two weeks. The introduction of the Intelligent Road Studs to its layout intends to increase driver awareness and improve lane discipline by showing the exact line they should be taking when joining the roundabout, reducing collisions and improving safety as a result.

Having road studs that are controllable is incredibly useful for traffic control and there are numerous other applications for the technology pending successful trials.  Using them to indicate whether road markings are in effect or not is a simple expansion of the same concept, for example indicating when bus lanes are in effect and warning drivers not to enter them.

Although it’s not clear as to whether they will be available or not, having road studs that can change colour is also well within the realms of possibility and would allow traffic controllers to alert/direct traffic instantly by switching the colours as a way of forewarning drivers of lane closures or restrictions.

Driver Assist

It has to be said that this is one of the few instances where a significant improvement in road safety can be achieved relatively easily without demanding anything more from already overtaxed drivers – and actually helps to reduce their burden.

The UK’s road network is getting increasingly crowded, and drivers are bombarded with information they have to quickly interpret and prioritise.  Simply telling drivers to ‘drive better’ isn’t productive in every instance; there are times when drivers need more assistance - and chastising them for not being better in a clearly difficult situation only adds to the frustration when the feeling is some of the responsibility lies with the poor road layout/signage/markings.

Switch Island highlights this. Local drivers avoid it whenever they can, and those from outside the area who don’t know to avoid it are the most likely to be involved in an accident because of their unfamiliarity with it. It all points to a badly designed road section that is making things harder for drivers instead of easier

No driver is safe from suffering the uncertainty that can come with approaching an unfamiliar and complex road layout, particularly some of the more confusing designs on the network.  This development is something all road users can look forward to as making a real difference without resorting to fines and penalties.

MAT FOUNDRY GROUP ARE A LEADING MANUFACTURER OF GREY AND DUCTILE IRON CAR COMPONENTS. TO LEARN MORE ABOUT US VIEW OUR PRODUCTS OR CONTACT US TODAY

Found this post useful? Why not share it with your network:

MME02012024

MAT Foundries Image

Mit Sitz in Poole [Großbritannien], ist die MAT Foundry Group Ltd. eine Tochtergesellschaft der mit Hauptsitz in Long Grove [Illinois/USA] ansässigen MAT Holdings Inc., welche weltweit auf drei Kontinenten einen Jahresumsatz von ca. 2 Milliarden US-Dollar erwirtschaftet und über 16.000 Mitarbeiter beschäftigt. Die MAT Foundry Group Ltd. ist mit weltweit 7 Gießereien, 11 Standorten zur mechanischen Bearbeitung und einem Jahresumsatz von mehr als 500 Millionen EUR ein führender Hersteller von Produkten für die Automobilindustrie. Mit der Unterstützung von etwa 3.000 Mitarbeitenden und 360.000 Tonnen produziertem und mechanisch bearbeitetem Stahl [Grau- und Sphäroguss] werden führende OEMs und Tier-1s der Branche beliefert. Die MAT Transmission Division, ist eine Business Unit der MAT Foundry Group Ltd. und vereint mehrere Gesellschaften mit insgesamt etwa 1.000 Mitarbeitenden.

Zur Verstärkung unseres Teams bei der MAT Machining Europe GmbH in Immenhausen | Hessen suchen wir zum nächstmöglichen Zeitpunkt einen erfahrenen und engagierten

 

Mechatroniker [m|w|d] in dem Bereich Instandhaltung

 

 

 

 

Ihre Hauptaufgaben & Kernkompetenzen

 

  • Gemeinsam mit dem Team übernehmen Sie die selbständige Fehlersuche und Reparatur sowie vorbeugende Instandhaltung von mechanischen, elektrotechnischen, hydraulischen und pneumatischen Anlagen.
  • Die Aufstellung und Inbetriebnahme neuer Anlagen und Maschinen fällt ebenfalls in Ihren Zuständigkeitsbereich.
  • Sie ermöglichen eine hohe technische Verfügbarkeit der Anlagen und Maschinen mit dem Ziel diese kontinuierlich zu verbessern.
  • Nach erfolgreicher Einarbeitung gewährleisten Sie als Teil des Instandhaltungsteams die Funktionalität und Sicherheit unserer Produktionsmaschinen und -anlagen im Mehrschichtbetrieb.

 

 

Ihr Profil

 

  • Sie verfügen über eine abgeschlossene Berufsausbildung als Mechatroniker für Betriebstechnik [m|w|d] bzw. eine vergleichbare Qualifikation.
  • Idealerweise bringen Sie Berufserfahrung im Bereich der Instandhaltung sowie Kenntnisse in der SPS-Technik [Siemens S7/TIA] mit.
  • Team- und Kommunikationsfähigkeit gepaart mit einem verantwortungsbewussten und selbstständigen Arbeitsstil zeichnen Sie aus.
  • Qualitäts­bewusstsein und ein sicherer Blick für die Priorisierung von Arbeitsabläufen sind für Sie selbstverständlich.
  • Ein Kranführerschein sowie Führerschein für Gabelstapler sind von Vorteil.
  • Sie bringen die Bereitschaft mit im Schichtdienst zu arbeiten.
  • Als Teamplayer ist Ihr Arbeitsstil geprägt von Einsatzbereitschaft, Strukturiertheit, Zuverlässigkeit und Flexibilität.
  • Gute MS Office-Kenntnisse, Deutsch- und Englischkenntnisse runden Ihr Profil ab.

 

 

 

Unser Angebot:

  • ein zukunftssicherer Arbeits­platz in einer erfolgreichen Unter­nehmens­gruppe
  • ein tolles Team mit Spaß bei der Arbeit
  • interessante und abwechslungsreiche Projekte & Aufgaben
  • Perspektiven zur persönlichen und fachlichen Entwicklung
  • das Einbringen Ihrer Ideen
  • angenehme, mitarbeiterorientierte und offene Firmenkultur
  • flache Hierarchie und schnelle Entscheidungswege
  • Wir begegnen uns auf Augen­höhe, geben uns wert­schätzen­des Feedback und pflegen einen of­fenen, ver­trauens­vollen Umgang.
  • Was noch? Finden Sie es heraus?

 

Interessiert?

Wir freuen uns auf Ihre Bewerbung: Karriere.mme@mateurope.com

 

MAT Machining Europe GmbH

Sandra Ebner

Karl-Heinz Fräger-Str. 3

34376 Immenhausen

Back to ListingApply Now